Click to enlarge

Isolation Pendulum Valve, Anodized

Part Number: IPV-H10342
Quantity:
 

Features
  • Space saving, compact design
  • Smooth actuation for low particle generation
  • In-situ seviceability through removable body cover
  • Wide selection of gate O-ring compounds
  • CE marked/fully REACH and RoHS compliant
HV Isolation Pendulum Valve, DA, HA, DN 160 ISO-F, RS, 24 V DC
Technical Resources
Specifications
  • Valve / Flange Size: DN 160 ISO-F
  • Finish: Hard Anodized
  • Position Indicator: Reed Switch
  • Pilot Valve: 24 V DC / 0.5 W, 24 V DC
  • Flange Size / Type: DN 160 ISO-F
  • Actuator: Pneumatic Double Acting
  • Supply Pressure: 4.5 bar (min), 6 bar (max)
  • Fitting Size: 1/4" tube quick disconnect
  • Pressure Range: 1 · 10-9 mbar to 1 bar
  • Max Differental at Opening: 20 mbar
  • Max Temp (body): 150 °C (valve open), 150 °C (valve closed)
  • Max Temp (actuator): 60 °C
  • Open / Close Time: 4 s/4 s
  • Open Conductance: 5000 l/s
  • Material (valve body): 6061-T6 Aluminum, Hard anodized
  • Material (valve mechanism): 304 Stainless & 6061-T6 Aluminum, Hard anodized
  • Gate Seal: FKM
  • Bonnet Seal: FKM
  • Leak Rate (body): 1 · 10-9 mbar l/s
  • Leak Rate (gate): 1 · 10-6 mbar l/s
  • Service Life: 200,000 cycles
  • Weight: 39.6 lbs
  • Bolt Hole Thread: M10
  • Thread Depth: 0.394"
  • # Bolt Holes: 8
IPV_dimension_drawing
Imperial Units
Dim A: 3.46"
Dim B: 3.31"
Dim C: 20.5"
Dim D: 12.8"
Dim E: 8.31"
Dim F: 9.69"
Dim G: 7.87"
Dim H: 5.31"

This website uses cookies and similar technologies. By accepting, you are agreeing to our Privacy Policy and Terms of Service, including our Cookie Policy.