Click to enlarge

Isolation Pendulum Valve, Anodized

Part Number: IPV-F13942
Quantity:
 

Features
  • Space saving, compact design
  • Smooth actuation for low particle generation
  • In-situ seviceability through removable body cover
  • Wide selection of gate O-ring compounds
  • CE marked/fully REACH and RoHS compliant
HV Isolation Pendulum Valve, DA, HA, DN 300 JIS, RS, 24 V DC
Technical Resources
Specifications
  • Valve / Flange Size: DN 300 JIS
  • Finish: Hard Anodized
  • Position Indicator: Reed Switch
  • Pilot Valve: 24 V DC, 24 V DC / 0.5 W
  • Flange Size / Type: DN 300 JIS
  • Actuator: Pneumatic Double Acting
  • Supply Pressure: 4.5 bar (min), 6 bar (max)
  • Fitting Size: 1/4" tube quick disconnect
  • Pressure Range: 1 · 10-9 mbar to 1 bar
  • Max Differental at Opening: 29 mbar
  • Max Temp (body): 150 °C (valve open), 150 °C (valve closed)
  • Max Temp (actuator): 60 °C
  • Open / Close Time: 5 s/5 s
  • Open Conductance: 30000 l/s
  • Material (valve body): A356 Aluminum, Hard anodized
  • Material (valve mechanism): 304 Stainless & 6061-T6 Aluminum, Hard anodized
  • Gate Seal: FKM
  • Bonnet Seal: FKM
  • Leak Rate (body): 1 · 10-9 mbar l/s
  • Leak Rate (gate): 1 · 10-6 mbar l/s
  • Service Life: 200,000 cycles
  • Weight: 121 lbs
  • Bolt Hole Thread: M12
  • Thread Depth: 0.709"
  • # Bolt Holes: 12
IPV_dimension_drawing
Imperial Units
Dim A: 4.72"
Dim B: 4.72"
Dim D: 21.0"
Dim E: 12.1"
Dim F: 10.7"
Dim G: 14.6"
Dim H: 10.6"

This website uses cookies and similar technologies. By accepting, you are agreeing to our Privacy Policy and Terms of Service, including our Cookie Policy.