Loading Shopping Cart
Loading shopping cart. Please wait.


ISO Flange

Nor-Cal Products manufactures an extensive line of thick wall flanged flexible hose. The hydroformed bellows assemblies are typically used for roughing lines. Thick wall flexible hose features a fewer number of convolutions per inch, resulting in a significantly more rigid hose than a medium or thin walled hose. 
◾Nominal Port ODs: 3/8 to 1-1/2 inches (10 to 38mm)
◾Body: Electropolished 304 stainless steel
◾Bonnet seal: FKM
◾Poppet seal: FKM
◾Other O-ring compounds available
◾Actuation: Normally closed 
◾3/8 to 11/2 inch (10 to 38mm) ODs: Air-to-open, spring-to-close
◾Operating pressure: 60 to 80 psig (4-5.5 bar)
◾Differential pressure
◾Port side: Maximum 100 psig (7 bar)
◾Poppet: Maximum 6psi (0.4 bar) differential across the valve seat.
◾Maximum temperature with FKM seals:
◾Sustained: <150°C
◾Intermittent: <204°C
◾Vacuum range: >1x 10-9 mbar - High Vacuum
◾Options: Fittings, O-rings, air solenoids, micro-switches and actuators.
Flex hoses are available with a variety of flange types or with butt weld fittings. The flexibility and reliability of these hoses, provided by 321 stainless steel, make them ideally suited for vibration isolation, roughing and alignment manifolds. Non-standard lengths can be supplied upon request. 304 and 316 stainless tubing is available in most common sizes and in several wall thicknesses. A variety of finishes are available as well. 

Clear Filter
Model No.
List Price
Your Price
Qty      Add
{{ x.N }} {{ x.D }}
$ {{ x.P | number:2 }}
$ {{ x.p | number:2 }}